Instructions

The embellishment of the walls behind the extravaganza of an unwitting baby can be re-created the interior and create an absolutely unique atmosphere in the booth. At the same time, it is not necessary for the mother to have the talent of an artist, to master the art of stencil drawing. Preparing stencils for fake farbuvannya stin - busy busy and creative.

The easiest way to make a stencil is from a plastic office folder, or not even a shingle acetate stencil. For the purpose of the artistic template, a whole lot of food is needed to be victorious in the cooler for robots with virobs with chocolate. On a sheet of tracing paper, a tiny olivtsy transfer the necessary little ones. As soon as the ornament will be victorious with a collection of colors, then it is necessary to make a stencil for leather from them, so that you do not see the change of farbs. For additional tracing paper, transfer the little ones to the base and use a clerical knife, or with a scalpel, accurately apply all the elements to the ornament. If it’s a possibility, then you can make a stencil from thin plastic behind an additional plotter design - a plastic stencil that is more advanced and handy. It’s important not to forget the stencil for the first time, but the stencil must be wiped cleanly for the skin wiping.

Stencils with simple ornamentation can be made from a kreslyarsky paper or artistic cardboard. Transfers for the additional tracing paper, or copying the paper, the little ones are violated, and the stencil itself is retarded with a linseed paper and hangs. The stencil can be replaced with a thin ball of light varnish - the templates do not be afraid of being prepared in such a rank, do not soften and do not consume the shape of the pouring in the farbi.

Large foldable babies, with a great number of details, can be made from thin sheets of cellulose - earlier, for many purposes, old X-ray signs were used. For the help of the hot water from the celluloid float, the image flies, for whom there is a glimpse and a hand for the victorian. The little ones can be placed directly from the sign and transferred directly to the blank for the template, for which it is accurately displayed. Such a stencil can be vikoristovuvatysya trivial hour, it is easy to clean up from the farbi with a vologo cloth.

Naybilsh labor-intensive є making a stencil-stamp. In addition, the basis of such a stencil is an ornamental pattern, before the decorative pattern is added and closed. For the help of the silikonizirovannogo sealant of the white colora, the contours of the little one are outlined, for which the sealant is given an hour to catch. Use a roller to scrape the lumpy little ones into the required color and press the finished stencil to the wall, on which the vidbit of the wiserunka is placed.

An hour, in the process of creativity, there is a need to create some kind of little ones, but they are far from skinny, but there are not all of them. You can come to see me for help stencil naya technology. You can find a ready-made example in the bottom or on the Internet, transfer it to a papier and an image stencil.

Instructions

Get over it, you have everything that is necessary for the robot: - Papir, for which you will need to do it. Pidijde papir for the printer or album arkush.
- Prozor tracing paper.
- Rizak (office worker), duzhe gostry.
- Olivets, liniyka, eraser.

On arkushі olіvtsom throw your stencil. Think over the way more specifically, especially respect to come up with thin lines. Remember, if you are making them thin, then the stencil in the cich can be torn in the fake.

If you want to pick up your stencil more than once, but a dump, then transfer the finished one to cardboard. Mind you, cardboard is not guilty but corrugated or kreidovanim. Naykrashche take cardboard boxes, in which to sell plastic or cereals.

To transfer the little ones, pick out the tracing paper and copy paper. Transfer the little ones to cardboard, circle them with a paper bag or a felt-tip pen, so the line, as you will see the stencil, has become different.

Now, schob farba did not fit into the stencil when robotic and not passive, but also to make a wide scotch tape and glue the cardboard with a stencil for the foreign ministry. Glue the edges of the stencil again, zagorayuyu with the scotch tape in the same direction - to add a stencil to the stencil and with it you will be successful.

Now look at the design or the clerical lower and accurately circulate the stencil. Good, if you have a symmetrical pattern to the stencil - you can simply fold the stencil in the center and display only once.

When growing, be even more protective - DO NOT laugh, in a persistent way, but in a different way, do not razrіzati thin shifters in a vіzerunka, so do not zіpsuvati yogo. In addition, as you made a stencil, you can glue the edge with adhesive tape, just rob it neatly, so you don’t overwhelm the little ones.

Video by topic

For the help of the paperwork stencil it is possible to apply barvisty small pieces on small surfaces - wood, papyr, plastic, ceramics, barbed wall. It is recommended for an unrecognized home master to start from a simple one-color checkerboard;

You know

• - tsupky papir;
• - stationery and paint tape;
• - knives;
• - copy;
• - olіvets;
• - low office or scalpel;
• - dirocol;
• - foam rubber sponge;
• - farba;
• - gum roller;
• - aerosol glue for stencil.

Instructions

Think over the little ones for stencil... With a singing maysternality, it can be done independently. As soon as you are wondering in your artistic health, download the ready-made template from the Internet and transfer it to the Whatman paper for additional copies. You can replace the whole workpiece by sticking it on the window from the sleepy side and creating a light olive contour. Do not use markers or felt-tip pens for any markers, as this may seep through the stencil.

Check the contour of the baby with knives, do not wrinkle the template and do not break the unnecessary images. For especially delicate lines and details, it is recommended to vikoristovuvati gosstro imprisonment clerical lower or scalpel, dirocol. Before each victorian, pick a sheet on the table with scotch tape, so that it is not "walking".

Place the paper template on the surface, and go to decorate. You can use a special adhesive for designers and artists for short-hour stencil fixing (like Scotch-Weld 75, Easy-Tack or Marabu).

Read the instructions on the aerosol packaging and follow the recommendations. Apply a small amount of fusion spray to the vivor side stencil and smoothly smooth out on a smooth surface with a hand or a gum roller. When robotic, the template is easy to see, and the glue on the wall (furniture, speeches) will not be visible.

If you decorate the shorstku wall, special aerosol may not match the paperwork blank. Attach the stencil behind the masking tape. The whole material cannot be overlaid on the surface of the adhesive (especially when the cheap adhesive is not high-quality), it can get sticky on the surface.

Prepare a farbah, yak suitable for a specific material. For example, for a wall and wood furniture, you can choose an acrylic barvnik from a buddy store; for a warehouse it is known only for specials because of the Deco Art Frost Effect or Porcelain paint; The fabric can be decorated with acrylic, relief or tempera colors.

Slightly sprinkle the foam rubber sponge into the barvnik and tap it on the sheet a couple of times. paperu, Schob will ensure the maybutn_y decor from the patties. Then dab the stencil with foam rubber, zapovnyuchi all the circulation of the wigglers.

Shvidko and carefully (DO NOT smear the farbah!) Know the stencil. If you want to grow up with a variety of colors, do it again and again, and only then proceed to the farther farbuvannya virobi.

Korisna is happy

As soon as you select the vicoristovuvati template more than once, it is recommended to replace the porch paper with a vibration of waxing, or on a plastic basis. Besides, you can buy special material for stencils in stores.

dzherela:

• Stenciling techniques in 2017

The technology of farbuvannya stin for an additional stencil from an hour of Ancient Egypt. The whole method of decoration does not interfere with its relevance until the next day. It’s not wonderful - the little stencil applied behind the help of the stencil allows you to re-create the interior.

Make sure to make an exclusive interior in an apartment, not necessarily a reference artist. You can customize the divovision on the beauty of this panel for additional stencils. The embellishment of the stin primischens from the others will go to the quiet, who are not volodya vivid artistic health.

Stencils are used to create a pattern for repeating a series of identical little pieces. The growth of vizierunka and the flexibility of visibility begin with the view of the savor of the gentlemen. You can experiment, show your imagination, play little, and if you don't have enough nauvochok, just copy something like little ones.

Sho take stencil

The stencil is a plate with virizas, the shape of the image will be described by the contour, which is vibrated to be applied to the surface. The stencil can be made independently.

A handful of treba vibrati babies. You can come up with and namaluvati yogo independently or transfer to a page in the magazine or books for additional copy paper. If the little ones are so overshadowed on the porch, then when the stencil is victorious, it will turn out to be sluggish. Transfer the yogo requirement to something more moisture resistant.

For the whole business, you can add special material for stencils. Ale і simple waxed paper, tobto tracing paper, buvaє quite enough. For a stencil, which is transferred to vikoristovuvati bagatorazovo, more beautifully vibrate such material, like papyr for lamіnatsії or thin plastic.

stencil preparation

Transfer the babies to the material. Try to get the help of a copy paper, or simply by way of applying a small piece and blanks for a stencil on a yaskrave, on a screen of an illuminated window.

Writing a full instruction for an hour, hurry up with a knife, knives. Fine details of the stencil are handled by a knife with a vuzy blade. Yakshcho pomilkovo was given to a loan, and it’s even simpler to fix it by sticking scotch tape on the pie. For the help of scotch tape, dozhe kindly zm_tsnyuvati gostri kuti, with a stencil you can get more koristuvaty.

One tip of the stencil is required to be applied to the one, to insert special marks. When the baby is applied, it will continue in the middle of the day - the signs will appear, as in the process of transferring the baby to the stencil. It is called a tsya operation poznachennya mіsts stikіv.

Before this time, apply on the wall of the little ones for an additional stencil, you need to hold a line on the wall, the little ones on the same page from the stele or pidlogs. It’s easy to follow the line for the help of the rubbed motose, and it’s easy to see it because of the line.

Rada 5: Yak pofarbuvati steinu with special stencils?

Yaskravі and great graphic stencils є, mabut, one of the most inexpensive and quick ways to add new farbs to your room. You can learn from the statistics, as it is self-important.

You know

• You will know a stencil, a farba, a roller and an adhesive tape.

Instructions

For a cob, you should see the size of the required baby. Vikoristovyuchi one and the same stencil can be used to cover the entire wall with a full-length, or to set a small one behind the size of babies, which can be seen on the backbone aphids even originally.

The stencil, as it can be stronger, is guilty of being squeezed to the wall, depriving it, if it is overwhelmed, it will be possible to take a farbuvannya. It is not possible, not in any case, to put a roller on the farbah, it is not possible, but on a new bulo zanadto a lot of farbi. Zayyu farba slіd get wet for the help of servetki. Carefully slide the stencil behind the additional roller, press lightly on the new one in order to trim the edges as clear as possible, and also not to allow the fast spreading of the farbi on all walls.

It is necessary to convert those, like a farba lay on a stencil, for whom to take a more protective cut, and then look in the middle. At this stage, it will be easier to make changes to your project, but at the same time and it is necessary to revise the standard of the ball farbi. If you will master everything, then turn the stencil on the place, and then move on to the robot. Deyakі fakhіvtsі vvazhayut, so much more neatly fasten the stencil on the big place, that doesn’t change the stench, as it is equally good to lyagє on the wall of the farb and the end of the robot.

If you get close to the end of the robot and go to the edges of the stencil, go to the edges of the stencil, then we will protect you and the stitches, the farba didn’t use it on that wall, if you don’t plan on the farbuvati. It’s like it’s stolosya, vitrіt plyama, vikoristovuchi vologu ganchіrku. Designers recommend that you circle the stencil around the stencil with color tape around the perimeter, so as not to let the barvnik get into the wall.

Vidalennya stencil, mabut, є find a part of the robot, and in this case you can see the result of a powerful robot. Check it out, if the farba is dry, if you don't know the stencil from the wall.