Bagato hto spriymaє farbuvannya wood pidlogi yak simple for a robot, viconati yaku is not difficult. Additional information cannot be considered correct. Before farbuvannya, the next step is to complete the process: vibrate to see the farb and tools, if necessary, to prepare the surface, and also to reconsider the quality of the result. Chim pofarbuvati derev'yanu pidlogu yak tse zrobiti?
preparation of tools
For farming wood pidlogs, you will need a standard set of tools, which includes a roller, small-sized penzliks, a paint tray, a spatula, a chisel and a painting line.
It is recommended to carry out a large part of the robot behind the help of the roller, so as to speed up the process. Perevaga vikorystannya roller polyagaє in the fact that the farba will be applied in a uniform ball on the view from the robot with a penzlik, if on the bottom you can be asserted to see the views between the two statues. To remove the best result, it is recommended to vibrate a roller with a short pile, so that all the fibers will be robbed on the surface with a short pile. 
Farbuvannya pidlogi in a wooden booth cannot do without a victorian of decorative brushes of a sizeable size. The brushes are stuck in the skins, as it is uncomfortable to use a roller. For carrying out robots, it is recommended to add a set of flute brushes - flat penzliks of pink width. Smell to become in the middle of nowhere to paint the huts, plinths and edges of the tree podlogi.
Інші items from the list have an additional character. A chisel can be used for seeing knots and other irregularities from the boards, and a spatula - if you need to fill the cracks. The process of preparation of the robot should, in a regular manner, be held before the farms for the purpose of rejecting the good result. 
The painting tray can be bought to buy in a set with a roller and to pick up for a set of farbi on the tool. Yak shvidko pofarbuvati pidlogi farboy?
With the help of a roller and a painting tray, you can not only quickly pick up the farbah, but also know the excess from the tool. To make sure that you get a Farbi on those surfaces, which you do not require in a Farbahn, it is recommended to use a painting line, as all robots are easy to see and do not overstep.
Yak vibrati farbu?
Vibir farbi for wood pidlogi is the most important stage of all preparatory robots, so as it is possible to lay down the quality and terms of the service of maybutny pokritty. Budget shops offer a wide assortment of varnishes and farbs for wood at a time, at any option for a variety of varnishes?
The range of majestic farbs. One of the main criteria for the choice of farbi for food is ї The floor is a surface, as it gradually collapses and periodically changes furniture. Yak pofarbuvati derev'yanu pidlogu, why should you have served your yakomog better?
If there is a lack of style for a podloga, then sooner or later on your podlozi will be withered foxes, pidlogo to draw in your adorable viglyad and all robots and will be brought to the knowledge.
The situation is slowing down the infusion of other particles of the brude - food and other stones, as well as chemical words, which can be consumed in a special way on a pedagogue.
Before tim yak vibrati, nіzh pіdfarbuvati old pіdlogu in a wooden booth, then brutalize respect for three criteria, in which case your vibіr will lie. Farba choose the type of wood of the statuary boards, the minds of the exploitation of the environment, to the extent to which it is worth mentioning, the intensity of mechanical pressure, and it is possible for temperature changes, as well as for some reason in front of it. 
When buying a Farbi, I respect those, all the banks were put to the same party. If you don’t need to clean up the purchased obsyagu, then є risik, for additional purchases in the store, the bank will be found for the color.
All lacoparbovy pokrittya, as vikoristovy for processing, can be divided into two types: clear and opaque. What is more beautiful than a farbuvati tree? The clearness of the light reflects the natural color of the tree, the structure of the tree is cradled and the wood grasps the wood from the inflow. Farbi are rendered impenetrable to pokritty, as I will increase the fancy to the surface of the pidlogi. The display of two types of pockets can be easily seen in the photo.
Prospects for pidlogs
We will see through to the pokritty for the wood-dwellers to introduce varnishes, oils and waxes of mastics. Quite a bite to eat for podlogi processing in quiet areas, since the flooring itself is not enough for a child to use a ball of opaque farbi for a podlog.
Pokrittya with varnish. Varnishing with varnish pidlogu maє glossy pokrittya, the term of the service, which is to become three rocky. Varnishes for food are presented in decor stores in different types. Primitive varnishes should be painted in the brightness of the front coat before applying the finishing varnish. It is necessary in vipadki, if it is necessary to sink a village, to cleanse the valuable species of a tree, to protect it more beautifully than a fine woodwork from a board.
Lassing warehouses are intended for the shedding of a tree in a variety of conditions, living conditions of microorganisms and high temperatures.
Acid-hardened varnishes are hardened to give wood flooring a larger natural appearance, and to give a surface in light colors, for the eyes.
How to correct farbuvati boards? Wood surfaces can also be covered with anhydrous polyurethane varnish, which is recommended for people with a high quality and high quality of chemical infusions, water varnish, which is perceived by men with a sharp smell of bitter taste and low flavor Before Tim, how to take up the applied varnish on the surface of the pidloga, it is recommended to look over the video instructions on the robot with a different kind of pokrittya.
See the waterborne polyurethane varnish.
Oils for leaking boardworms are vyroblyayutsya from natural olіy, up to which synthetic elements can be added, which will allow you to cleanse a tree from a sumptuous one. The oil penetrates into the middle of the plate, increasing the efficiency to the current officials and increasing the terms of exploitation. Waxes for pidlog vikoristovyutsya yak finishna obrobka, scho nadaє surface garnishing blisk. Two views are most often blocked for a peek behind the parquet board.
Farbi for trees pidlog
Naybіlsh frequent feedings, nіzh fаrbuvati woody pіdlogu, є vicoriannja opaque farbi, so I will increase the primordial color of the surface. For processing the pidloga, let us use two types of farbi: emali and farbi on the basis of organic roschinniks. 
Farbi on organic basis are acrylic, water-dispersible and latex. Naybіlsh go for processing pіdlog water-dispersion options.
Such a farbi is easy to apply on the surface, it is good to use it for a long time, and it is also characterized by good vapor permeability.
The vibrating type of farbs is magnificent, the assortment is widespread over two thousand types.
Yakisna farba of a hopeful virobnik will serve you for about ten years.
Farbuvannya of wood pidlogy with one's own hands is often carried out і behind the addition of emelevy farbs, as well as oil, alkyd, pentaphthalemic and nitrocellulosic development. The enamel when hanging is set on the surface of the coating to a hard wash, a styling to water and striking temperatures. 
For bazhannyam you can vibrate the letter for a pidlog with a glossy abnormal effect. The number of types of emalevic farbs is also even more cost-effective, the vibrating option is not difficult to stock.
specialties of farbuvannya
Farbuvannya pidlogi can be viral in three ways, the skin is vicious with singing minds. At the first glance, an oil painting or a primer is applied to the wood flooring, when the top coat is applied with a combination of one, and then another, a ball of farbi. Tsey method allows you to trim the surface of the garn, as well as the flooring without visible defects.
Another method includes an additional stage, which is the transmission of defects in statuses before the application of balls of farbi. In general, all the troughs and lines are spattered in front of the front and cleaned with a spatula. The third way of farbuvannya wood pedlogs transferring carrying out puttying of the surface and farbuvannya in three balls.
You can use any of these methods to pick the podloga in your booth, lay it down from the cob mill, if you have violated the problem: chim fancy a tree pidlog - a lacquer for a farboi.