A great vibe of health-conscious materials, including lacoparb ones, allows for some kind of lightness, as it is shown to all vimogam not only because of the quality and callous viglyad, ale and in the art. On the other hand, I respect the merit of Molotkov Farb. Its name was taken away by the zavdyaki tsіkavіy invoices, similar to the hand karbuvannya, how to go to paint.
Call farb with hammer effect to be used for decorating constructions from metal: furniture, doors, car bodies and a lot of things. For high indicators, the support of corrosion can be applied directly along the surface, without giving off the surface of the cleaned soil and soil, as in the case of other types of coatings. In addition to metal virobes, hammerhead emal is perfect for robots on wood, farmers of various industrial objects.
reasons for popularity
A collection of hammer farb was used for processing the possessions for virobnits and laboratories. At that time, there was no need to cut a wide range of colors, as the decorative side of the food was not respectful. Vikoristovuvali found an available pagment, that is, all the virobi, chipped with a farboy, mali siriy kolir.
The popularity of the farb has given birth to its high anti-corrosive authorities and non-removability to the latest injections. The most zealous von nabula widened and at once stuck in, car parts and virobes for metal, the most sophisticated up to the day.
Column range of hammer farbi Warehouse and vіdminnі signs
Molotkova farba is designed for the capture of virobes in metal, to become stagnant in industry, virobnity and other spheres, so that they are constantly being used. For the preparation of alcohol and epoxy speech, it will take away the vinyatkov characteristics.
Entering before the warehouse of silikonov resin and metal pigments guarantees uniqueness, ease of application and visibility from the surface. For the growth of the number of components, the growth of the power of the Farbi is significant, and the anticorrosive power is reached.
It is even stronger to improve the quality of the presence in the warehouses on the basis of: non-fractional sklo, aluminum powder and others. The staff cannot only reach the stiffness of the surface and adhesion, but also the unique texture, similar to the manual carving for metal. The very fact is that this is due to the power of the mask to remove any defects on the surface. Also, in it, they add the development of silikoni and "aluminum plastic", which in the end add texture to the texture and improve the health of the patient.
Main reloads
Tsei material is characterized by a small amount of perevag. Most of them have crops in their warehouse:
- One of the provincial characteristics is the durability of coverage up to temperature differences - it can be heated up to +80 ° C.
- In that case, if the hammer farba is guilty of being applied to the surface, covering it with іrzhey, it’s not enough to consume it in advance for cleaning and cleaning. I will forgive the process of carrying out painting work.
- Another perevaga - shvidke hanging in the warehouse. Nishvidshim get used to aerosol. Already after two years, the application of the coating is hardened, and no stickiness will be added to it. Particularly important is the power when shaping the body of the car and the day of the victorious doors.
- A high step support for new flows - temperature drops and changes in weather conditions, as well as lack of visibility to vibrations - to improve the amount of time needed for cleaning, metal parts
- Molotkova farba guarantor zakist began to show corrosion up to 8 years.
- The special fireworks have been broken up. However, the stench is still used in a special high-pressure warehouse for metal metal, which is widely used in the process of robustness of high-pressure steel and armored doors.
- Molotkova emal is absolutely safe for people and for the repeated visit of not seeing any awkward words. Vona has been diminished by the unpleasant odor characteristic of baguette lacoparb materials. Do not allow me to be victorious for carrying out internal work.
- It can be applied using different methods: penzal, roller, aerosol at the viglyad. If I want the other option, it’s expensive, so yak doesn’t allow regulating vitrate per 1 m2.
- A wide range of colors of the Farbi community allows you to add the necessary options for farbuvannya any kind - from the garage doors to the car body and metal rack.
- Firmi-virobniks sing along, but the surface is crumbled, not to absorb their color yak minimum three rocks.
- Garage gates, hammered with hammer-type pokritty, will be on the way less cramps until they get bogged down, less pokrytіy faraboyu for metal. Vitrata farbi is roughly the same.
Sphere vikorystannya
Zavdyak their exclusive yakosti, hammerhead emal nabula wide expansion in different regions virobniztva. Її vikoristovuyu to cover the numerical types of constructions:
- industrial possession and verstat buildings;
- electrical panels and special attachments;
- metal construction;
- safes, metal boxes, shelves and flexible office furniture;
- fence and gate;
- it is not easy to use a hammer farboi for decorating virobes, vikonanikh from skla, hard plastic and kahlyu.
Yak right zastosovuvati
So, as the focus is on getting stuck in other spheres, to pick up the numerical types of surfaces, including those covered with red metal, the technique of farming can be seen in different situations. More beautifully, learn from the instructions, I will explain how farbuvati hammer farboi are in vipadki, which are often used.
In the first place, it is necessary to correctly prepare it.
If the metal is new, then before the ear of the robot it is necessary to shake off the ball of the factory mast, which is present on the surface.
For the whole її it is worthwhile to wash at least two times with the vicarians of the dealer - White Spirit is most often taken. It is necessary to wipe the paint with acetone. As it is even smoother, it is recommended to sand it, and to lighten it up with the pokritty.
When farbuvanny with your own hands, elements, on what is already present, lacoparbium material, brightens up some of the visible parts, instead of using a weak range of powder and clean water, let it dry.
For decorative processing of galvanized, aluminum or chavunnyh elements, it is necessary to apply a primer-emal. It is also necessary to build up the process of preparation of midwives, tin, lead virobes.
Before the farbuvannya of the wood surface, it is also better to grind the acrylic soil-emalu, so that the warehouse does not penetrate the poros, which leads to the destruction of the texture.
application methods
Razrіznyayut a lot of methods of farming on top of hammer farboi. The price can be cut with a penzel, a roller, a spray at a viglyadі aerosol, pneumatic sawing or a non-repetitive method. The ball to be applied to the warehouse is to blame for a minimum of 100 microns, so that it will not be damaged, and a decent amount of vitrate per 1 m2.
Vikoristannya to aerosol should be carried out by hand in quiet drops, if it is planned to carry out painting work on a small surface. It is unlikely that there is a good way to go for decorating a car body - in all kinds of vipads, it’s better to speed up with a headlight control panel. Zastosovuvati aerosol can also be used manually in the preparation of other elements. Before the ear of the farbuvannya balonchik, it is necessary to scruffle close to three quills, which mixed together. In the case of aerosol, it is not easy to trace the vitrate of the farbi, so it is applied three to one of the balls, the interval between the warehouses is a minimum of 15 quilins.
For cutting large surfaces, such as parkans and gates, use pneumatic sawing behind the help of a farbest control panel. Schob, with your own hands, aspire to the correct warehouse, it is important to correctly develop the viscosity. Farb needs to be added with a distributor in such proportions, as it is stipulated in the instructions, for 2: 1. Given this, it will be correct to prepare aerosol at temperatures from +18 to +22 ° C.
The flawless rosé is also similar to aerosol; For processing doors, bodies, large parts, the headlamp can be adjusted with a 9: 1 ratio.
The average vitrate of hammer farbi should be 100 g per 1 m2;
Independently of that, which way of applying: aerosol, spray gun, brush or roller, hammer farb, whatever the case, will demonstrate high exploitation quality. Vona є is the optimal option for farming metal surfaces of growing virobes.